tangential direction meaning in English
正切方向
Examples
- A mesh smoothing algorithm based on tangential direction
基于切向的网格平滑算法 - The feedrate in tangential direction was adjusted by the fuzzy velocity controller for reducing the worst burrs and defects to obtain better quality contour
而模糊速度控制器被用来调节工具进给速度，从而彻底清除较大的毛刺，避免损害工件和刀具，得到理想的加工表面。 - A method presented for designing diagonal impeller blading from blade elements defined on cones which pass through the blade - edge streamline locations . the staking line for the blade elements can be leaned in both the axial and tangential directions
叶片造型分为基元叶片确定及沿叶高的积叠方式，在叶片积叠过程中，考虑了气动力以及离心力力距对叶片积叠点的影响。 - The results showed that : there were five stages in the rising process of the internal temperature of untreated , fire - retardant solution soaked , and fire - proof paint coated wood during the fire ; the carbonization rate of wood decreased by 21 . 1 % ~ 35 . 6 % and the rising speed of internal temperature also declined greatly when wood was soaked in fire - retardant solution or coated with fireproof paint ; the carbonization rate of white pine was 8 . 5 % ~ 17 . 4 % higher than that of the northeast china ash ; for untreated wood , the carbonization rate in tangential direction was 5 . 8 % ~ 10 . 5 % higher than that in radial direction ; the internal temperature of wood varies with the developing direction of combustion
结果表明：火灾发生过程中未处理木材、阻燃浸渍处理和涂刷防火徐料木材内部温度上升过程出现5个阶段；经过阻燃浸渍处理和涂刷防火涂料后，木材的燃烧炭化速度降低了21 . 1 % ~ 35 . 6 % ，内部温度上升速度大幅度下降；白皮松木材的燃烧炭化速度比水曲柳木材的燃烧炭化速度快8 . 5 % ~ 17 . 4 % ；未处理木材沿弦向的燃烧炭化速度比径向快5 . 8 % ~ 10 . 5 % ；木材内部的温度变化沿燃烧推进方向不同而不同。 - In contrast , taken as a contact problem , the principal characters of the interfaces can be reflected : ( 1 ) the contact interface is of shear strength which implies that a generic pair of contact points on the interface will displace coincidentally if the tangential force at this point has not reached the limit resistance , else , relative slide between the points will occur along the tangential direction . ( 2 ) no matter the relative slide occurs or not , the contact bodies cannot invade each other in any wise
同时指出，将桩土相互作用按接触问题来处理，可以更好地反映出该接触面的主要力学特征，即： ( 1 )接触面具有相应的“抗剪强度” ，即当接触面上的某一点处的切向应力小于该点处的抗剪强度时，该处桩土共同变形；达到其抗剪强度时，则沿切向发生滑动； ( 2 )在整个变形过程中，桩与土不能互相侵入。